How to waterproof the buried cable joint?

Buried cables are affected by the weather or the environment, and are unavoidably damp; we can use cable joints for waterproofing, which not only improves safety, but also increases the service life of the cable. How to waterproof the buried cable joint? Let me introduce to you:

1. Both ends of the cable connector are wrapped with waterproof glue;

2. A special waterproof transfer box can be used to put the connector in the box, and fill the box with insulating glue;

3. Wrap the two ends of the cable insulation joint with waterproof tape, and then wrap a layer of self-adhesive waterproof tape until the sheath is heated and shrunk.

Waterproof joints can provide safe and reliable connector joints in the environment with water. The production process of waterproof joints is roughly classified into the following 5 steps:

1. Blanking

Cut according to the size and setting of the waterproof joint.

2. Processing

According to the customer's samples or drawings, the production is strictly in accordance with the production standards.

3. Polishing

Strictly polish according to production requirements to make the product glossy and clean.

4. Inspection

Product inspection and defective product recycling to ensure that the thread and appearance of each product are complete.

5. Assembly